Optimizing the Potential of 3D Printing for Industry from Prototype to Production

Mohamad Agus Setiawan; Ageng Setiani Rafika; Ramzi Zainum Ikhsan; Ninda Lutfiani; Richard Evans

doi:10.34306/adimas.v6i1.1193

Penulis

Mohamad Agus Setiawan IPB University, Indonesia https://orcid.org/0009-0003-6697-4879
Ageng Setiani Rafika University of Raharja, Indonesia https://orcid.org/0000-0002-9737-7298
Ramzi Zainum Ikhsan University of Raharja, Indonesia https://orcid.org/0009-0005-2253-6476
Ninda Lutfiani Satya Wacana Christian University, Indonesia https://orcid.org/0000-0001-7019-0020
Richard Evans ADI-Journal Incorporation, USA https://orcid.org/0009-0007-7280-8323

DOI:

https://doi.org/10.34306/adimas.v6i1.1193

Kata Kunci:

3D Printing, Additive Manufacturing, Production, Efficiency, Industry

Abstrak

The adoption of 3D printing technology has increased across various industrial sectors due to its ability to accelerate product development, reduce production costs, and support flexible manufacturing. However, implementation at the community and small–medium industry level remains limited due to gaps in technical skills, digital design knowledge, and structured technology transfer. This community service program aims to enhance the practical capacity of industrial partners in utilizing 3D printing, particularly in transitioning from prototyping to small-scale production. The program used the Participatory Action Research (PAR) approach through needs assessment, technology transfer training, hands-on practice, mentoring, and evaluation. Participants were guided in 3D modeling, printer setup, material selection, and print optimization. The program improved participants technical skills and confidence in producing functional prototypes according to industrial needs. Production time was reduced, design modification became more efficient, and opportunities for product innovation increased, supporting independent and adaptive manufacturing. This program successfully strengthened community-based industrial capabilities in adopting digital manufacturing, contributing to SDG 8 (Decent Work and Economic Growth) and SDG 9 (Industry, Innovation, and Infrastructure). Future activities are recommended to expand collaborative product development and sustain innovation networks between academia and industry.

Unduhan

Data unduhan tidak tersedia.

Referensi

Jabil, “3d printing applications in manufacturing: A new age,” 2022. [Online]. Available: https://www.jabil.com/blog/3d-printing-applications.html

K. B. C. S. Direktorat Jenderal Bea dan Cukai, ““peran teknologi dalam mendukung umkm di era digital”,” KMS Knowledge Article, Kementerian Keuangan Republik Indonesia, Oct 2024, available at: https://klc2.kemenkeu.go.id/kms/knowledge/peran-teknologi-dalam-mendukung-umkm-di-era-digital-9bb0490d/detail.

S. S. Bahri, M. Hardini, H. Hamdan, and H. Imran, “Eksplorasi penerimaan teknologi untuk pembelajaran digital dalam pendidikan islam: Dampak perspektif agama terhadap tik: Exploring technology acceptance for digital learning in islamic education: The impact of religious perspectives on ict,” Alfabet Jurnal Wawasan Agama Risalah Islamiah, Teknologi dan Sosial, vol. 2, no. 1, pp. 1–12, 2025.

K. Lutfiyah, M. S. Maarif, Y. H. Asnawi, and L. D. Arsyianti, “Optimizing islamic boarding school edupreneurship through internet of things adoption and fuzzy analytical hierarchy process,” Aptisi Transactions on Technopreneurship (ATT), vol. 7, no. 1, pp. 1–12, 2025.

AMFG, “Additive manufacturing in 2022: The ultimate rundown,” 2022. [Online]. Available: https://amfg.ai/2022/12/23/additive-manufacturing-in-2022-the-ultimate-rundown/

P. Nurhabibah, M. N. Ayubi, Y. Ismiyanti, and M. Madisson, “Pemanfaatan teknologi digital dalam memfasilitasi ibadah dan pendidikan islam: Utilization of digital technology in facilitating islamic worship and education,” Alfabet Jurnal Wawasan Agama Risalah Islamiah, Teknologi dan Sosial, vol. 2, no. 1, pp. 44–54, 2025.

R. G. Munthe, Q. Aini, N. Lutfiani, I. Van Persie, and A. Ramadhan, “Transforming scientific publication management in the era of disruption: Smartpls approach in innovation and efficiency analysis,” APTISI Transactions on Management, vol. 8, no. 2, pp. 123–130, 2024.

S. Wijaya, A. Husain, M. Laurens, and A. Birgithri, “ilearning education challenge: Combining the power of blockchain with gamification concepts,” Journal of Computer Science and Technology Application, vol. 1, no. 1, pp. 8–15, 2024.

AMFG, “Industrial applications of 3d printing: The ultimate guide,” 2022. [Online]. Available: https://amfg.ai/industrial-applications-of-3d-printing-the-ultimate-guide/

S. S. Wulandari, M. L. B. M. Diah, and A. Asari, “Digital proficiency and entrepreneurial mindset for sme success through market savvy and tech literacy,” Aptisi Transactions on Technopreneurship (ATT), vol. 7, no. 1, pp. 26–36, 2025.

D. P. Industry, “2022 trends in 3d printing: Forecasts from additive manufacturing experts and leaders,” 2022. [Online]. Available: https://3dprintingindustry.com/news/2022-trends-in-3d-printing-forecasts-from-additive-manufacturing-experts-and-leaders-202426/

Eplus3D, “Trends for additive manufacturing and 3d printing in 2022: Larger and bigger,” 2022. [Online]. Available: https://www.eplus3d.com/ trends-for-additive-manufacturing-and-3d-printing-in-2022-larger-and-bigger.html

M. Yusup, S. V. Sihotang, M. Sunengsih, L. Devi, and P. A. Sunarya, “Optimizing graduate competitiveness through service with mathematical economics and obe: Optimalisasi daya saing lulusan melalui pengabdian dengan matematika ekonomi dan obe,” ADI Pengabdian Kepada Masyarakat, vol. 5, no. 2, pp. 92–103, 2025.

E. Nauw, N. Asyik, and I. Riharjo, “Analisis fenomena flypaper effect pada belanja daerah dengan pendekatan software spss 20: Analysis of the flypaper effect phenomenon on regional spending with the spss 20 software approach,” Technomedia Journal, vol. 9, no. 2, pp. 157–167, 2023.

B. Any, T. Ramadhan, E. A. Nabila et al., “Decentralized academic platforms: The future of education in the age of blockchain,” Blockchain Frontier Technology, vol. 3, no. 2, pp. 112–124, 2024.

A. Leffia, S. A. Anjani, M. Hardini, S. V. Sihotang, and Q. Aini, “Corporate strategies to improve platform economic performance: The role of technology, ethics, and investment management,” Journal of Computer Science and Technology Application, vol. 1, no. 1, pp. 16–25, 2024.

A. Pro, “3d printing for mass production: High-volume 3d printing,” 2022. [Online]. Available: https://all3dp.com/1/3d-printing-for-mass-production/

AMFG, “Three ways additive manufacturing is changing supply chain management,” 2022. [Online]. Available: https://amfg.ai/2025/02/26/ three-ways-additive-manufacturing-is-changing-supply-chain-management/

Protolabs, “3d printing trend report 2024,” 2024. [Online]. Available: https://www.protolabs.com/ resources/guides-and-trend-reports/3d-printing-trend-report/

A. Saulina and A. Delhi, “Implementation of the public blockchain technology system in the future to increase tourist visits in tangerang city,” Blockchain Frontier Technology, vol. 3, no. 2, pp. 132–137, 2024.

B. E. Maryono, V. R. Handoko, A. Maduwinarti, and C. Gusmao, “Analysis of npm based public policy to enhance sustainability performance: A grounded theory,” Aptisi Transactions on Technopreneurship (ATT), vol. 7, no. 1, pp. 97–108, 2025.

A. A. Iswandi, H. R. Ngemba, S. Hendra, M. N. D. Ulhaq, A. Iswandi, H. Ngemba, S. Hendra, S. Syahrullah, and M. Noval Daffa Ulhaq, “Implementasi algoritma rc4 pada sistem informasi pelaporan dukcapil provinsi sulawesi tengah,” 2024.

K. Mirdad, O. P. M. Daeli, N. Septiani, A. Ekawati, and U. Rusilowati, “Optimizing student engagement and performance usingai-enabled educational tools,” Journal of Computer Science and Technology Application, vol. 1, no. 1, pp. 53–60, 2024.

H. A. Winata and F. Simon, “Influence of profitability, audit quality, and corporate governance on earnings management,” APTISI Transactions on Management, vol. 8, no. 2, pp. 93–104, 2024.

R. N. Mauliza and Y. R. Sipayung, “Penerapan text mining dalam menganalisis pendapat masyarakat terhadap pemilu 2024 pada media sosial x menggunakan metode naive bayes,” vol, vol. 9, pp. 1–16, 2024.

R. Z. Ikhsan, S. Rahayu, A. H. Arribathi, and N. Azizah, “Integrating artificial intelligence with 3d printing technology in healthcare: Sustainable solutions for clinical training optimization,” ADI Journal on Recent Innovation, vol. 6, no. 2, pp. 99–107, 2025.

M. R. Farisi, P. Hadisiwi, and S. P. Wirabhuana, “Implementasi promotion mix pada keluarga baba wedding organizer dalam meningkatkan jumlah pengguna jasa di era new normal.”

E. Sana, L. W. Ming, D. Hernandez, and R. Kask, “Leadership styles and employee engagement: A management perspective in the service industry,” APTISI Transactions on Management, vol. 8, no. 2, pp. 146–151, 2024.

A. Gunawan, M. M. D. Nusantara, R. Z. Ikhsan, and M. Madisson, “Implementasi ajaran islam dalam praktik bisnis etis pada usaha mikro dan menengah muslim: Implementation of islamic teachings in ethical business practices in muslim micro and medium enterprises,” Alfabet Jurnal Wawasan Agama Risalah Islamiah, Teknologi dan Sosial, vol. 2, no. 1, pp. 67–77, 2025.

W. Setyowati, T. A. Setiyono, G. Gung, and B. Novriyanti, “Leveraging technology in accounting for entrepreneurial insight into government budgeting efficiency,” Aptisi Transactions on Technopreneurship (ATT), vol. 5, no. 3, pp. 251–260, 2023.

L. Kask, N. Bloom, and R. Porta, “Health informatics: Utilization of information technology in health care and patient management,” International Journal of Cyber and IT Service Management, vol. 4, no. 1, pp. 52–57, 2024.

R. Fahrudin, M. Hatta, Y. Yulianti, E. Erwin, and A. Zelene, “Machine learning for the next generation: A guide to matchmaking at startups,” IAIC Transactions on Sustainable Digital Innovation (ITSDI), vol. 6, no. 1, pp. 65–74, 2024.

R. Heriyanto and T. Mariyanti, “Poverty alleviation strategies through sharia microfinance institutions politico-economics study with tawhidi approach,” Aptisi Transactions on Management, vol. 6, no. 2, pp. 132–141, 2022.

M. Bilal and E. Andajani, “Factors affecting the intention to use roof solar panel in households in indonesia,” ADI Journal on Recent Innovation, vol. 5, no. 1, pp. 25–33, 2023.

M. Ahli, M. F. Hilmi, and A. Abudaqa, “Moderating effect of employee service quality and mediating impact of experiential marketing in uae entrepreneurial sector,” Aptisi Transactions on Technopreneurship (ATT), vol. 6, no. 2, pp. 285–299, 2024.

G. Fransiso, N. P. L. Santoso, M. Abbas, and Y. I. Tanjung, “Strategi pengembangan produk lokal melalui pendekatan social commerce pada umkm,” ADI Bisnis Digital Interdisiplin Jurnal, vol. 5, no. 2, pp. 48–55, 2024.

T. W. Sitanggang, H. Priyono, L. Patel et al., “Lingkungan bermain digital mengintegrasikan teknologi dengan permainan tradisional di prasekolah: Digital play environment integrating technology with traditional play in preschool,” Jurnal MENTARI: Manajemen, Pendidikan dan Teknologi Informasi, vol. 3, no. 2, pp. 187–194, 2025.

A. Ruangkanjanases, A. Khan, O. Sivarak, U. Rahardja, and S.-C. Chen, “Modeling the consumers’ flow experience in e-commerce: The integration of ecm and tam with the antecedents of flow experience,” SAGE Open, vol. 14, no. 2, p. 21582440241258595, 2024.

A. S. Anwar, U. Rahardja, A. G. Prawiyogi, N. P. L. Santoso, and S. Maulana, “ilearning model approach in creating blockchain based higher education trust,” Int. J. Artif. Intell. Res, vol. 6, no. 1, 2022.

R. Sivaraman, M.-H. Lin, M. I. C. Vargas, S. I. S. Al-Hawary, U. Rahardja, F. A. H. Al-Khafaji, E. V. Golubtsova, and L. Li, “Multi-objective hybrid system development: To increase the performance of diesel/photovoltaic/wind/battery system.” Mathematical Modelling of Engineering Problems, vol. 11, no. 3, 2024.

A. Pambudi, N. Lutfiani, M. Hardini, A. R. A. Zahra, and U. Rahardja, “The digital revolution of startup matchmaking: Ai and computer science synergies,” in 2023 Eighth International Conference on Informatics and Computing (ICIC). IEEE, 2023, pp. 1–6.

M. W. Wicaksono, M. B. Hakim, F. H. Wijaya, T. Saleh, E. Sana et al., “Analyzing the influence of artificial intelligence on digital innovation: A smartpls approach,” IAIC Transactions on Sustainable Digital Innovation (ITSDI), vol. 5, no. 2, pp. 108–116, 2024.

A. H. D. Saputra, S. N. W. Putra, and D. Bennet, “Consumer behavior and brand loyalty: A study on digital marketing practices,” Startupreneur Business Digital (SABDA Journal), vol. 3, no. 2, pp. 160–170, 2024.

M. H. R. Chakim, U. Rahardja, E. D. Astuti, E. Erika, and C. T. Hua, “The social empowerment role of the penta helix entrepreneurship ecosystem in driving the national economy,” ADI Pengabdian Kepada Masyarakat, vol. 6, no. 1, pp. 1–13, 2025.

B. Djatmiko, A. Marantika, M. R. Syauqy, S. Pranata, L. Meria, and C. S. Bangun, “Pandopo catering as a medium for student community service and community empowerment: Pandopo catering sebagai media pengabdian mahasiswa dan pemberdayaan masyarakat,” ADI Pengabdian Kepada Masyarakat, vol. 5, no. 2, pp. 160–169, 2025.

I. A. Mutiara, A. Syamsuddin, M. Maharida, F. Napasti, and L. Hasnawati, “Instilling nationalism and sociopreneurship in young indonesian immigrants,” Aptisi Transactions on Technopreneurship (ATT), vol. 7, no. 1, pp. 37–47, 2025.

S. C. Brain, “How 3d printing can streamline supply chains,” 2022. [Online]. Available: https://www. supplychainbrain.com/blogs/1-think-tank/post/34349-how-3d-printing-can-streamline-supply-chains